Enbrighten 12in. Hard Wire LED Light Bar, Tunable White

I was looking for hardwired, dimmable, 5 color temp selections, linkable lights for a reasonable price. Check.
I bought a total of 7 units in 12, 18 and 24". Install was easy, as I had easy access to the junction boxes from my old halogen units.
A cheat that I used was cutting off the connector closest to the junction box, stripping back the white insulation to expose the 3 conductors to tie into the house wiring. I know you are supposed to use the knockouts, but with proper strain relief, this becomes plug and play and perfectly safe.
Be sure to cut off the correct end of that cable, as the ends are different!
I went a little overboard with my switching, using Lutron Diva dimmers on each of the 3 banks of lights and then a couple of Pico remotes to control all of them. I probably spent as much on controls as lights, but it works great.
I can't comment on durability, but so far I couldn't be happier with the product.
My backsplashes haven't gone in yet, so I will update photos later.

So much easier to find the cookware that's needed in deeper cabinets under the counter. Unlike your typical cabinet lighting, this bar is fairly long. What that means is that you aren't stuck trying to put multiple smaller lights in select places using adhesives and other fasteners. You just have the one main light to use. The brightness is excellent for our needs. The adhesive is good and keeps things in place. The light is functional and works well.

Like this led light a lot. Written instructions were not very good but video explained everything . Easy to install

I ordered this to replace the lights over my sink and it is the perfect width. Of course you'll want to measure first, but I'm very happy with the brightness and quality of this fixture. Keep in mind that this does not plug into a wall outlet so you'll need to wire it up yourself. If you know what you're getting into and willing to do that, you should be happy with this light. 5 stars.

This review is for Enbrighten 24 inch white hardwired under cabinet lights.
It works with a wired wall switch but also has a physical on/off switch on the light. It also works with a dimmer wall switch but it doesn’t have a dimmer control on the light itself. There are 5 white temp options ranging from soft white (2700K) to cool daylight (6500K). The 24” is 1623 lumens and 16.5 watts.
I got this to replace an existing hardwired under cabinet light. The wires can come out of the light at 4 knockout points spread out on the back of the fixture or another 4 knockout points spread out on the back edge of the fixture. The wires are plenty long.
The underside panel needs to be taken off to access the wires. You can then use the underside panel to mark where you want the mounting screws. There is also an included paper template. The light fixture slides onto the screws.
I don’t yet have a second light fixture but I plan to get one next time I see a good sale price. You can plug into another fixture that is already hardwired. You can use the included end-to-end connector to get them about 0.25” apart or a linking cord that is approximately 18” long. To install the linked fixture there is a paper template since you don’t need to open up the housing to access wires.
Overall this is a good fixture.