We have a light on in the kitchen all the time to be able to see better and to not kill ourselves at night. I've been wanting to replace our florescent bulb version for the longest time since it emits UV and ages and fades all the spices on the rack behind it. We had a power outage the other day which blew the bulb in our fixture. I took it as a sign and bought this, so I chose this in a rush to have something in place.
Considering that, I'm pretty happy with this. I like the Kelvin shift switch to get different color temperatures. I tend to make it "warm" (middle setting) during the day and fully orange at night (blue light keeps you awake).
As far as installation goes, it would of been a breeze if the manufacturer would have put break outs on the side with the bulb on it. I do realize I could have just added more wire, but I didn't want to. Which means I had to modify the light casing to provide an exit for the wires on the bulb side of the light. I got a pretty big break with this as there's an arch space under the LED strip on each side and screws on the back to lift the light strip up. I used my Dremel with a diamond disc to cut a small notch in the casing and a prettier more traditional U-shaped notched on the outside casing. Of course since I wanted as small of an opening as possible I wasn't able to use the wire clamp/protector in the hole so I wrapped the wires in Gorilla Tape and also made sure to smooth the edges of the casing with a Dremel grind attachment. It worked out pretty well I think.
I got lucky with the screw placement for mounting the light. It was in the exact spots that the old fixture hung. So all I needed to do was replace the screws because the heads were too big for this fixture. If you aren't as lucky as me it's still not terrible to place the screws since the fixture is so light.
Draw yourself a straight line (important) find your drill with proper bit size make sure this line is the same distance apart as the smaller part of the holes. For most people exact placement isn't necessary, but if it is, you'll need to match the end of the fixture holes smaller side to the line you drew. With your drill in the other hand carefully drill through the hole using the fixture as a template. It's better to use a smaller bit than necessary if you do this. You can always make the hole bigger if you need to, but you probably won't.
The wiring couldn't be easier. Find your breaker for that area and flip it off. I had solid core wiring. White to white, black to black. Old house, so no ground (yeah I know). The wires just push into these connectors and to test the bite of them give each wire a gentle tug so you know it's not going to come free later.
Now the moment of glory. Go flip your breaker back on and enjoy the brightness.
Other reviewers weren't wrong, the light is pretty bright even with a partition/light shield in front. I saw the word "dimmable" in the sales info and mistakenly thought this light had controls on it to dim. Not so. It's really not practical for me to install a dimmer switch either. Did I mention old house? Yeah, so not only are three-way switches not possible, but the physical switches in the kitchen for the light and disposal are in the same box in a vertical configuration. Each switch flips horizontally to control each appliance. So not really an option.
Which is why I need to emphasize to the manufacturer that I'd be willing to pay extra for such a control on the light fixture itself. It's disappointing to not have one.
Lastly, I need to emphasize that the actual light itself does not appear replaceable. I'm unsure what that means for the future of this light as it remains on constantly in our house. I tend to avoid things like this because I'm a big "right to repair" proponent. Throw-away technology is the worst kind. Our last light fixture lasted 50 years. Had I fixed the tombstone on the one side for the contacts and bought a new bulb who knows how much longer it would have worked. Unfortunately, it was the wrong application of this technology for the area it was in so it had to go.
That said, these lights use an LED strip. If the manufacturer wanted to, they could simply sell a replacement light strip with a plug-in harness at the end and keep these lights running indefinitely. Less trash in our world.
Please people demand such things from the companies we buy from. What would you rather do, wire-up a new fixture when this burns out or plug in a new LED strip and keep using the same product again and again?
It's a no-brainer and a win-win for us and our waste problem. Thanks for reading.